Application In Accordance With Regulations; Installation Notes - Reloop RMP-2 MK2 Bedienungsanleitung

APPLICATION IN ACCORDANCE WITH REGULATIONS

-
-
-
-
Maintenance
-
-
-
contain any parts which are subject to maintenance. Maintenance must only
be carried out by qualified staff.

INSTALLATION NOTES

A) Connect the OUT hub -43- with the Line IN hub of your mixing console or
B) Connect the hub -46- with the line cord and insert it into your outlet.
C) The Relay Play connection -39- can be used for Relay Play as well as for the
D) Optionally, attach headphones to the 6.3mm stereo jack connection -40-.
E) After making all connections, switch the device on using the ON/OFF switch
F) Gently slide a CD with the picture facing upwards into the slot -1-. The CD is
22
This device is a professional CD player for replay of conventional CDs and
MP3-CDs. To listen to CDs connect this equipment to a mixing console.
This product is authorised for connection to 230 V, 50 Hz and is designed
exclusively for indoor application.
If the device is used for any other purposes than those described in the
operation manual, damage can be caused to the product, leading to the
exclusion of implied warranty rights. Moreover, any other application that
does not comply with the specified purpose harbours risks such as short
circuit, fire, electric shock, etc.
The serial number determined by the manufacturer must never be removed
to uphold the implied warranty rights.
Check the technical safety of the device regularly for damage to the mains
line or the casing, as well as for wear of wear parts such as rotary and sliding
switches.
If it is to be assumed that the safe operation is no longer feasible then the
device must be disconnected and secured against accidental use. Always
disconnect mains plug from the outlet!
It must be assumed that a safe operation is no longer feasible if the device
bears visible defects, if the device no longer functions, following longer
storage under unfavourable conditions or after major transport stress.
amplifier. Optionally, connect the digital OUT hub -44- with any device that
features a digital IN hub, such as a CD burner, MD recorder, digital mixer or
audio card.
Fader Start function. For more details go to item -39-.
Use the control button -41- to set the volume.
-45-. If no CD is in the drive, the Status LED above the drive -1- is continually
illuminated.
automatically pulled in. When playing a CD with a diameter of less than 12 cm,
use any conventional adapter. Press the Eject -19- button while in Pause/Cue
mode to eject the CD.
CAUTION LASER RADIATION!
This device is equipped with two Class 1 laser
diodes. To ensure a safe operation do not remove
any covers or try to access the inside of the
equipment. The inside of the device does not