ENGLISH
What to do if...
Problem
The appliance cannot be ac-
tivated or is not operating.
Acoustic signal sounds, ap-
pliance deactivates.
Display is switching between
two power settings.
The residual heat indicator is
not displaying anything.
There is no signal when you
touch panel symbols.
lights up on the power
setting display.
Possible cause
The appliance is not connec-
ted to an electrical supply or
it is connected incorrectly.
More than 10 seconds
passed since you activated
the hob.
The Child Safety Device or
the Lock is on
.
Several symbols were
touched at the same time.
One or more symbols have
been covered for longer
than 10 seconds.
Power exchange function is
reducing the power of this
cooking zone.
The cooking zone was only
on for a short time and is
therefore not hot.
The signals are deactivated. Activate the signals. Refer to
Unsuitable cookware.
No cookware on the cooking
zone.
The diameter of the bottom
of the cookware is too small
for the cooking zone.
Remedy
Check if the appliance is cor-
rectly connected to the elec-
trical supply (refer to con-
nection diagram).
Activate the appliance
again.
Deactivate the Child Safety
Device (See the section
"Child Safety Device" or
"Lock").
Touch only one symbol.
Uncover symbols.
See the section "Power ex-
change function".
If the cooking zone is sup-
posed to be hot, call the Af-
ter Sales Service.
OffSound Control.
Use suitable cookware.
Place cookware on the cook-
ing zone.
Move onto a smaller cooking
zone.
14