Volleyball - Stramatel Multisport Serie 452 Bedienungsanleitung

VOLLEYBALL

Set-up
The main control console is used alone (the other control consoles are not used in this mode).
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Volleyball" mode with key 3.
The console screen displays the stored configuration during a few seconds: automatic start of technical
time-outs or not, length of the technical time-outs if needed, length of the other time-outs.
Press key 18 to view the data on the console screen longer.
Change the configuration with key 0 or play with the stored configuration with key 9.
To change configuration: answer the various questions displayed on the console screen with keys 0 to 9,
and enter your answer with key 23.
During programming, it is always possible to come back to the previous programming with key 13.
Game timer
Start or stop the game timer with key 18.
If needed, stop the game timer with key 18 and reset it (back to 0) with key 28.
Correction of the game timer:

stop the game timer with key 18, then enter in timer correction mode by pressing keys 16 and
18 simultaneously.

shorten the game time with key 16 or increase it with key 20. Enter with key 18.
Scores
Add 1 point with key 10 (Home) or key 26 (Guests).
Deduct 1 point by pressing keys 16 and 10 or 26 simultaneously.
Validate the sets won with key 23.
It is possible to come back to the last operation with key 13 (the last 3 operations can be cancelled). The
number of points and sets can be automatically corrected.
Special case - Euroleague relegation match: at the end of the match, if the results are even after 2
matches, it is possible to play a Golden set in 15 winning points.
Press key 28, then key 9. The Golden set can start.
ZI de Bel Air 44850 LE CELLIER FRANCE
UA452MXX0XX_A - Control console 452M.docx
stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
Page 14