White Balance - Velleman CAMCOLBUL35 Bedienungsanleitung

7.5 Mirror and Flip
Use the MIRROR and FLIP functions to mirror the image or to flip it upside down.
Menu: IMAGE > MIRROR
Select ON to mirror the image; select OFF to keep the image as it is.
Menu: IMAGE > FLIP
Select ON to flip the image upside down; select OFF to keep the image as
it is.
7.6 Brightness
Use this option to set the image brightness (0–250).
Menu: IMAGE > BRIGHTNESS
7.7 Digital Zoom
Use this option to zoom in on the image (50–100).
Menu: IMAGE > ZOOM IN
7.8 Day/Night
The camera automatically switches between colour images in day conditions and black-and-white images
in night conditions. The camera has an IR-cut filter that filters the IR light, so it cannot distort the colour
image.
Use this function to control the day/night behaviour of the camera.
Menu: DAY&NIGHT

AUTO: use this setting for cameras without IR-cut filter, or if you want to switch the IR-cut filter off
during the day. In this case, the IR light is not filtered during the day, and colours may be distorted
by the IR light.

IR-CUT: the camera automatically disables the IR-cut filter during night conditions. During the day,
the IR light is filtered so that the colours are not distorted. During the night, the IR light is used to
generate better images.
7.9

White Balance

Use this menu option to define the white balance adjustment. White balance makes sure that white
objects are always reproduced correctly.
Menu: WB
The following white balance settings are available: AWB-PRO, AWB-TEMPORAL, AWB-AI, AWB-SZ,
AWB-GW, AWB-CCT.
Defining the optimal setting depends on the illumination conditions of your particular environment. To
find the optimal setting, try each of the settings and select the one that gives the best results.
7.10 Zone Masking for Privacy
Use this function to block a part of the image where you don't want to view activity. For example, if part
of the image shows a public area where recording may be illegal. You can define up to 8 areas.
Menu: ZONE MASKING
COLOR Select a colour for the mask, or select MOSAIC for a mosaic effect in the masked area.
V. 01 – 10/03/2014
CAMCOLBUL35
6 ©Velleman nv