Transport; Storage; Guarantee; Technical Data - ATIKA KSL 2200/40 Bedienungsanleitung

T r a n s p o r t
T r a n s p o r t
Remove mains plug before each

transport.

Transport the chain only with the chain protection put
on.

Storage

Store unused equipment in a dry, locked place out of
the reach of children.
To extend the service life of the saw and guarantee
smooth operation, before storing for a longer period
thoroughly clean the chain saw
Remove the oil from the oil tank.
Hint:
Some chain oils tend to encrustations after a longer
period. For this reason the oil system should be
flushed before a longer storing with a chain saw
cleaner. Fill the cleaner up to the middle (appr. 50
ml) into the oil tank. Close the tank. Switch on the
chain saw without assembled sword and chain until
the complete cleaner has left the oil opening of the
chain saw.
Put the saw chain for a short time into an oil bath
and enwrap it afterwards in an oil paper .

Technical data

Typ
Motor rating P
1
Mains voltage
Mains frequency
No-load speed
Mains fuse
Length of sword
Saw chain speed
Oil tank volume max.
Protection class
Braking time of the chain brake
Weight
measured sound power level L
guaranteed sound power level L
Sound power level L (according to regulation 2000/14/EC)
Pa
Hand-arm vibration front (according to EN 1033/DIN 45675)
Hand-arm vibration rear (according to EN 1033/DIN 45675)
WA
WA
G u a r a n t e e
G u a r a n t e e
Please observe the enclosed terms of guarantee.
KSL 2200/40
2200 W
230 V~
50 Hz
7600 min
–1
16 A inert
400 mm
13.5 m/s
150 ml
ΙΙ /
0.1 sec.
approx. 5,9 kg
101 dB (A)
(measured according to regulation 2000/14/EC)
102 dB (A)
(measured according to regulation 2000/14/EC)
80,74 dB (A)
a = < 3,85m/s²
vhw
a = < 3,43m/s²
vhw
25