Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before Using Your Appliance for the First Time
Time of day
Before you use your appliance for the
first time, it is necessary to set the
current time on the electronic timer.
After connecting to the mains, or after a
power failure, the display
Setting the time:
+
Press the
button and set the current
time with the rotary knob (e.g.
Note: The time cannot be set if an
automatic function is active (see Electronic
clock for cancelling automatic function).
Preliminary cleaning:
1. Clean the appliance exterior with a soft
moistened cloth.
2. Clean the oven and the accessories with
a hot detergent solution.
Please observe the operating
instructions furnished with the hob.
46
will blink.
{:{{
).
| Å:{{
Initial burn-in
1. Heat the empty oven for approx.
2. Operate cast-iron hotplates, without
30 minutes.
Select top and bottom heat at a setting
of 240° C.
During the initial burn-in phase, please
open the kitchen windows to dissipate
unpleasant odours.
placing utensils on them, on the highest
heat setting for about 1 to 2 minutes.
The odour rising from the hotplates is
caused by the burning-in of the
corrosion protection, and occurs only
during the initial use.
Werbung
Kapitel
Inhaltsverzeichnis
