Samsung HW-E450 Bedienungsanleitung Seite 42

to connect the Air track to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo
headset function.
1. Press the fUnctiOn button on the remote control of AirTrack to
display the Bt message.
•
2. Select the Bluetooth menu on the Bluetooth device you want to
connect. (refer to the Bluetooth device's user manual)
Connect
3. Select the Stereo headset menu on the Bluetooth device.
•
4. Select "samsung Home audio" from the searched list.
•
Bluetooth device
•
5. Play music on the connected device.
•
•
You will see Wait for 4 seconds and then reaDy on the front display
of the Air Track.
You will see a list of scanned devices.
When the Air Track is connected to the Bluetooth device, the device
name of the connected Bluetooth device, followed by Air Track will
display cOnn on the front display.
If the Bluetooth device has failed to be paired with Air Track, delete the
previous "SAMSUNG HOME AUDIO" found by the Bluetooth device and
make it search for Air Track again.
You can listen to the music playing on the connected Bluetooth device
over the Crystal Surround Air Track system.
In BT mode, Play/Repeat/Stop/Next/Back functions are not available.
▪
You may be required to enter a PIN code (password) when
connecting the Bluetooth device to the Air Track. If the PIN code
input window appears, enter <0000>.
▪
The Air Track only supports Middle Quality SBC data (up to
237kbps@48kHz), and does not support High Quality SBC data
(328kbps@44.1kHz).
▪
The AVRCP feature is not supported.
▪
Connect only to a Bluetooth device that supports the A2DP (AV)
function.
▪
You cannot connect to a Bluetooth device that supports only
the HF (Hands Free) function.
▪
Only one Bluetooth device can be paired at a time.
▪
Once you have turned off Air Track and the pairing is
disconnected, the pairing will not be restored automatically. To
reconnect, you must pair the device again.
▪
Search or connection may not be performed properly by Air
Track in the following cases:
-
If there is a strong electrical field around Air Track.
-
If several Bluetooth devices are simultaneously paired with
AirTrack
-
If the Bluetooth device is turned off, not in place, or
malfunctions
-
Note that such devices as microwave ovens, wireless LAN
adaptors, fluorescent lights, and gas stoves use the same
frequency range as the Bluetooth device, which can cause
electric interference.
1