Functional Description; Intended Use; Product Features; Declaration Of Conformity - Bosch GWS Professional 6-100 Originalbetriebsanleitung

26 | English

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for cutting, roughing,
and brushing metal and stone materials without
using water.
For cutting metal, a special protection guard for
cutting (accessory) must be used.
For cutting stone, a special extraction hood for
cutting with cutting guide (accessory) must be
used.
With approved sanding tools, the machine can
be used for sanding with sanding discs.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Spindle lock button
2 On/Off switch
3 Thumbwheel for speed preselection
(GWS 6-100 E/GWS 6-115 E/
GWS 6-125 E/GWS 850 CE)
4 Auxiliary handle
5 Grinder spindle
6 Locking screw for protection guard
7 Protection guard for grinding
8 Mounting flange with O-ring
1 609 929 L32 | (3.3.08)
9 Grinding/cutting disc*
10 Clamping nut
11 Quick-clamping nut
12 Protection guard for cutting*
13 Carbide grinding head*
14 Hand guard*
15 Rubber sanding plate*
16 Sanding sheet*
17 Round nut*
18 Cup brush*
19 Cutting guide with dust extraction protec-
tion guard *
20 Diamond cutting disc*
*The accessories illustrated or described are not in-
cluded as standard delivery.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
05.02.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
*
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools