Installation Using The Screw Holes On The Side Of The Navigation Unit - Pioneer avic f10bt Installationsanleitung

Section
04 Installation
Installation using the screw holes
on the side of the navigation unit
1 Remove the side brackets.
2 Fastening the navigation unit to the
factory radio-mounting bracket.
Position the navigation unit so that its screw
holes are aligned with the screw holes of the
bracket, and tighten the screws at 3 or 4 loca-
tions on each side.
24
Engb
Side bracket
Screw for fixing the side bracket
(5 mm  8 mm)
Factory radio mounting bracket
Binding screw or
flush surface screw
Be sure to use the
screws supplied
with this navigation
system.
If the pawl gets in the
way, bend it down
Dashboard or console