Clean Air Mode; Clean Ion Shower Mode; Fan Speed Button - Sharp KC-860E Bedienungsanleitung

CLEAN AIR MODE

Use the Clean Air Mode when additional humidity is not required.
1
Press the CLEAN AIR MODE Button on the display.
• If the power cord was not unplugged between uses, the unit will
automatically re-start at the previously selected settings.
2
Press the FAN SPEED BUTTON to select the de-
sired fan speed.
• Indicator lights will show the fan
speed currently selected.
Press the Power OFF Button to turn the unit off.

CLEAN ION SHOWER MODE

CLEAN ION SHOWER Mode with humidification releases high-density Plasmacluster ions.
By continuously discharging strong airflow for 15 minitues, the unit effectively removes air-
borne dust, pollen, mold and allergens from the air as they are drawn through the filter system.
Water must be in the Water Tank when this mode is selected.
The unit humidifies when there's water in the Water Tank, and it operates without humidifying
when there's no water in it.
1
Press the CLEAN ION SHOWER MODE Button
on the display to select this mode.
When the operation finishes, the unit will return to the prior
operation.
Press the Power OFF Button to turn the unit off.

Fan Speed Button

Please note the fan speed cannot be adjusted during the CLEAN ION SHOWER MODE.
AUTO operation
POLLEN mode
operation
MAX operation
MEDIUM operation
LOW operation
The fan speed is automatically switched (between HIGH and LOW) depend-
ing on the amount of impurities in the air. The sensors detect impurities for
efficient air purfication.
The unit will operate at High Level for
10 minutes, then will atternate be-
tween MEDIUM and HIGH.
The unit will operate at maximum fan speed.
The unit will operate at medium fan speed.
The unit will operate quietly using minimal air intake.
*HiGH fan speed is an intermediate speed between MEDIUM and MAX.
E-9
10 minutes: High fan level
20 minutes: Medium fan level
20 minutes: High fan level