Manual Buttonhole (Model 2800) - ELNA 2600 Bedienungsanleitung

Manual Buttonhole (Model 2800)

Machine setting
Stitch:
1
Stitch width: 4 – 5
2
Stitch length: 0.5 – 1
3
Thread tension: 1 – 5
4
Presser foot: For or optional B
5
If the diameter of the button is more than 1" (2.5 cm), a
buttonhole must be made manually as follows:
Pull the buttonhole lever down as far as it will go.
1
Draw needle and bobbin threads to the left.
Lower the needle into the fabric at the starting point,
and lower the foot.
Needle thread
1
Bobbin thread
2
Starting point
3
Sew the front bartack and left row to the desired
2
length then stop the machine.
Click the buttonhole lever toward you.
3
Sew the back bartack and right row, and then stop the
4
machine at the starting point.
When buttonhole sewing is finished, push the
5
buttonhole lever up as far as it will go.
66