Bridge Mode - D-Link DSL-321B Benutzerhandbuch

Section 3 – Configuration
For Bridged connections it will be necessary for most users to install
additional software on any computer that will use the Modem for Internet
access. The additional software is used for the purpose of identifying and
verifying your account, and then granting Internet access to the computer
requesting the connection. The connection software requires the user to
enter the User Name and Password for the ISP account. This information
is stored on the computer, not in the Modem.
.
To configure a Static IP Address WAN connection, follow these steps:
1. Choose the Connection Type from the drop-down menu. This
defines both the connection protocol and encapsulation method
used for your ADSL service. The available options are 1483
Bridged IP LLC and 1483 Bridged IP VC-Mux. If you have not been
provided specific information for this setting, leave the default
setting.
2. If you are instructed to change the VPI or VCI values, type in the
values assigned for your account.
3. When you are satisfied that all the WAN settings are configured
correctly, click the Apply Settings button. This will save the
settings and reboot the Modem to let your changes take effect.
D-Link DSL-321B User Manual

Bridge Mode

24