Using The Sound Control Memory; Selecting And Storing The Sound Modes - JVC KD-S676R Bedienungsanleitung

Using the Sound Control Memory

You can select and store a preset sound adjustment suitable to each playback source.
(Advanced SCM)

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory, and will be recalled every time you
select the same source. A sound mode can be stored each of the following sources — FM1,
FM2, FM3, AM and CD.
• If you do not want to store the sound mode separately for each playback source, but want
to use the same sound mode for all the sources, see "Canceling Advanced SCM" on page
24.
1
SCM
Indication
SCM OFF
BEAT
SOFT
POP
22
Equalization pattern indicator
Select the sound mode you want.
Each time you press the button, the sound mode changes as follows.
• If the "Link" indicator is lit on the display (with "SCM LINK" set to
"LINK ON" — see page 24), the selected sound mode can be stored
in memory for the current source, and the effect applies to the current
source.
• If the "Link" indicator is NOT lit on the display (with "SCM LINK" set to
"LINK OFF"), the selected sound mode effect applies to any source.
For:
(Flat sound)
Rock or disco music
Quiet background music
Light music
1
Preset values
Bass Treble
00 00
+02 00
+01 –03
+04 +01
"Link" indicator/
sound mode
indicators
Loudness
On
On
Off
Off