7.3.
Inserting batteries
The handsets each come supplied with two nickel metal
hydride rechargeable batteries "AAA" 500 mAh.
NOTE!
Only use nickel metal hydride rechargeable
batteries of the supplied type (NiMh; 1.2 V; 500
mAh) in the handset.
The device warranty will expire
if you insert any other type of
rechargeable battery or non-
rechargeable batteries. This could
damage the handset.
Slide down the battery cover on the
back of the handset.
Insert the two rechargeable
batteries into the battery
compartment, paying attention
to the polarity (+/–) (with the negative end against the
springs).
Slide the cover back onto the battery compartment.
7.4.
Charging the rechargeable
batteries for the handset in the
base station/charging station
Place the handset in the charging cradle of the base
station or charging station. A beep indicates that
the handset has been correctly placed in the cradle.
The animated battery charging symbol shows the
charging process on the handset display.
248 / 290