Operating Elements And Connections - Omnitronic PM-211P Bedienungsanleitung

4. OPERATING ELEMENTS AND CONNECTIONS

1
Input selector switches
For switching the rear inputs of channels 1 and 2
from line to phono input.
2
Gain controls
Adjust the input amplification for channels 1 and 2.
3
Tone control for the DJ microphone
4
Channel faders for channels 1 and 2
5
Level control for the DJ microphone
6
Talkover on/off
On/off switch for the talkover function. With the button
engaged (red LED lights), the levels of the channels 1
and 2 are automatically attenuated by 20 dB when
announcements are made with the DJ microphone.
7
Crossfader
For crossfading between channel 1 and channel 2.
8
Output level LED meter
Switchable 6-digit LED meter for the stereo master
signal or the monitor signal within the range of -10
dB to +5 dB. In monitor mode, the prefader signal of
channel 1 is displayed on the left side of the level
meter and the prefader signal of channel 2 on the
right side.
9
Selector switch LED level display
• Switch disenganged: indication of the master level
• Switch engaged: indication of the monitor level of
channels 1 and 2 (red LED lights)
10
Control CUE MIXING
Fades between channel 1 and channel 2 for the
headphones output.
11
Level control for the headphones output
12
Master level control
13
USB port
USB port for connecting a USB storage device.
The MP3 player's signal is directly sent to the
master outputs; it is not affected by the TALKOVER
switch and cannot be routed to the headphones
output.
14 Button [►II]
For switching between play and pause.
15 Buttons [] and []
• Short actuation: for title selection
• Long actuation: for fast forward/reverse
16
Level control for the MP3 player
15/20 00072954.DOC, Version 1.0