Safety; Intended Use; Standards And Directives - Haier HW100-B14266A Handbuch

4

Intended use

This washing machine is for domestic use only. If the machine is use for commercial
purpose the guarantee will not be valid anymore. Do not use it for purposes other
than that for which it was designed. Follow the instructions given on the label of each
garment and wash only machine-washable garments.
Changes or modifications to the device are not allowed. Such interventions lead to
loss of warranty claims.

Standards and directives

This product meets the requirements of all applicable EC directives with the corres-
ponding harmonised standards, which provide for CE marking.
Before switching on the appliance for the
first time...
...make sure all transport bolts are removed.
...make sure the power cord is not caught under or in
the appliance and there is no damage or risk for damaging.
...make sure the power circuit fuse is rated for 15A.
...use a separate earthed socket for the power supply.
...make sure the plug is always accessible.
...hold the plug and not the electric cable when unplugging
the power supply.
...check that hose joints and connections are firm and
by opening tap check for any waterleakage.
...do not switch on the appliance until everything is properly
installed!
Do not ...
...install the appliance outdoors in a damp place, or in an
area which may be prone to water leaks such as under
or near a sink unit. In the event of a water leak cut power
supply and allow the machine to dry naturally.
...expose machine to any frost, heat or direct sunlight.
...touch or use the appliance when barefoot or with wet or
damp hands or feet.
...use flammable detergent or dry cleaning agent.
...use any flammable sprays in close vicinity to the appliance.
...remove or insert the plug in presence of flammable gas.
...place the appliance directly on a carpet, or close to
a wall or furniture.

Safety