Displays And Buttons; Setting The Time; Setting The Date - Lotus ILM0S11 Betriebsanleitung

DISPLAYS AND BUTTONS

Chronograph
minute hand
Minute hand
Hour hand
Calendar
Second hand
ILM0S11
Chronograph
second hand
Button A
1st position
2nd position
Normal crown
Button B
10
ILM0S11

SETTING THE TIME

1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, small second hand begins to
run.

SETTING THE DATE

1. Pull the crown out to the 1st position
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may
position
not change on the following day.
3. After the date has been set, push the crown back to the normal position.
11