Assembly/Usage Instructions; Safety Equipment; Rating Plate - Caso 1750 Original Bedienungsanleitung

14.2 Assembly/Usage instructions

14.2.1
14.2.2

14.3 Safety equipment

14.4 Rating plate

caso MultiReibe
Select the drum that will be used and insert it into the chute
opening. The exterior metal portions of the drums are sharp.
Handle them carefully. Insert drum into food chamber.
Personal and property damages can occur during
commissioning of or handling the device!
Observe the following safety notices to avoid such dangers:
► Drums are sharp. Handle them carefully.
Attach the food chamber assembly to the housing base. With
the handle in your right hand and holding the food chamber at a
15° angle, aline the food chamber with the corresponding shaft
recess on the housing base. The driving end of the assembly
must be fully inserted into the socket of the motorized base.
Next, while pushing the food chamber assembly firmly in toward
the handle, rotate the assembly counterclockwise until it is
upright and it is centered with the handle.
Personal and property damages can occur during
commissioning of or handling the device!
Observe the following safety notices to avoid such dangers:
► Make sure appliance is off when not in use, before putting
on or taking off parts.
Safety switches prevent the machine from operating when the
drum and feed tube are not locked into position.
The motor stops within seconds when the motor is turned off.
The rating plate with the connection and performance data can
be founded on the back of the device.
Design and Function
Warning
Warning
36