Programmed Recording With Epg (Electronic Pro-Gramme Guide); Pvr Playback; Time Shift Function - AEG CTV 2404 LED-DVB-T Bedienungsanleitung

If the programme is broadcast on a different channel, a warning message appears on the screen.
The programmes which are broadcast on a channel depend on the coverage area. Information on channels that are
broadcast in your coverage area can be found at www.überallfernsehen.de or at your specialist dealer.

9.3 Programmed Recording with EPG (Electronic Pro-gramme Guide)

1. Press the EPG button to access the electronic programme guide.
2. Press INDEX and press / to select CHANNEL (1).
3. In CHANNEL (2) press / to select the channel.
4. Press / to select the desired programme.
5. Press the red button. The recorder window is displayed.
6. Press OK to confirm the entered times.
7. Programming is finished and the dates are shown in the Overview.
8. Press EXIT to close the window.
NOTE:
• During recording the info bar is displayed. Press REC/REP to hide the info bar. The REC button top left on screen
remains.
• Important: The device does not automatically turn off after the recording is finished.
Different Programme Modes
To change the recording mode of the programming via EPG, select the bottom line in the Timer window. Here, select
between the following modes:
Auto: The preset times of the station are saved.
Once: If necessary, you can change the preset start and end times.
Daily: The programme is recorded daily.
Weekly: The programme is recorded again on the same day of the week.

9.4 PVR Playback

1. Press the INDEX button to display your recordings.
2. Repeatedly press the INDEX button to sort the recordings by Programme, Channel, Time.
3. Press / to select the desired recording.
4. Press (19) to start playback.
5. Press to end playback.
NOTE:
• During playback the info bar is displayed. Press
• Press the button to pause playback ( see "9.5 Time Shift Function" on page 63).

9.5 Time Shift Function

The time shift function allows you to interrupt a programme and to continue viewing it later. A USB device with suffici-
ent capacity must be connected. Time shift size list set after formatting ( see "9.1 PVR Settings" on page 62).
1. Press the button. The image is "frozen". On the bottom of the screen the elapsed time is displayed.
2. Press (19) to activate time shift playback.
NOTE:
Press to hide the info bar. The time shift logo appears top left on screen.
3. Press / to skip forward and back in the time window.
4. Press / to activate the search.
5. Press to pause playback again.
Press to exit the function.
to hide the info bar. The PLAY button top left on screen remains.
ENGLISH
63