Remote Control Unit - AEG CTV 4859 Bedienungsanleitung

19" TFT LCD TV CTV 4859 LCD/DVB-T

REMOTE CONTROL UNIT

7 Remote control unit
48
POWER Button
Press this button to switch on the TV when at standby mode or
enter standby mode.
MUTE Button
Press this button to mute or restore sound.
P.M Button
Press this button to select the desired picture mode:
Custom -- Normal -- Dynamic -- Soft
Display Button (analog TV only)
Press this button to display the setting on the screen.
Timer Button
Press this button to set the sleep timer, the order shown below
(minutes):
0-10-20-30-40-50-60-70-80-90-100-110-120
When the preset length of the time has passed, the TV set
enters standby mode.
TV/AV/DVB-T Button
Press this button to switch among TV broadcast,
AV input program and other inputs. Press
TV/AV/DVB-T button to enter the AV menu. Press
the PROG+/PROG- buttons to select the AV
source and press VOL+ to confirm.
-/-- Button (0-9) (analog TV only)
Press this button to select one-digit, two-digit or tree digital
channels input options.
To select an one-digit channel (e.g. Channel 8), press this (-/--)
button to change channel selection to "-" on screen display and
press the (8) button only.
To select a two-digit channel (e.g. Channel 28), press this (-/--)
button to change channel selection to "--" on screen display and
press (2) and (8) buttons.
To select a three-digit channel (e.g. Channel 128), press this (-/--)
button to change channel selection to "---" on screen display and
press (1), (2) and (8) buttons.