Select Source; Connect External Devices; Basic Operation - AEG CTV 4948 Bedienungsanleitung

. Press On/Off on the right side to turn the
TV set on. The Installation Guide menu is
displayed.
2. Press OK to confirm English as menu
language (press ◄/► and OK on the remote
control to select a different language). The
item Auto Search is marked.
3. Press OK. Press ◄/► to select the country
of your location.
4. Press OK twice to start automatic search.
This process will take a few minutes. The
progress is displayed on screen.
5. After finishing the search channel number 
is automatically displayed.
6. The menu closes after a few seconds or
press EXIT.

3.7 SELECT SOURCE

. Turn the TV set on and press SOURCE. The
source menu (devices for the corresponding
inputs) is displayed.
2. Press SOURCE or ▲/▼ on the remote
control or CH +/- on the TV set to select the
desired source.
3. Press OK or VOL +/- on the TV set to
confirm.
PLEASE NOTE: Press EXIT to exit without
changes.

4. CONNECT EXTERNAL DEVICES

The TV set comes with a set of inputs for
external devices (e.g. DVD recorder, PC,
ca¬mera and set top box).
IMPORTANT! Ensure that TV set and external
devices are turned off before connecting.
Please also read details in the manuals of the
external devices.
SCART Connection
The SCART connector at the rear transmits
analog video and audio signals in good quality.
Connect VCR, satellite receiver, game console
or PayTV decoder.
• Connect the device via SCART cable to
SCART.
• Select SCART in the SOURCE menu.
VIDEO Connection
Connect a video camera via the RCA inputs L
and R and AV or S-VIDEO.
• Connect the device via AV cable or RCA and
S-Video cable to AV, L and R or S-VIDEO, L
and R.
IMPORTANT! Observe the color-coding of the
AV cable (video = yellow, audio L = white and
audio R = red).
• Select AV or SVIDEO in the SOURCE menu.
PC Connection
• Connect PC via VGA cable to VGA INPUT
on the TV set.
• Connect an audio cable to PC audio out and
VGA AUDIO INPUT on the TV set.
• Select PC in the SOURCE menu.
Component Connection
The component input Y Pb Pr transmits analog
video signals of a connected device, such
as AV receiver or DVD recorder in very good
quality.
• Connect via component cable (purchase
separately) (3 x RCA) to component output
of external device and inputs Y Pb Pr on the
TV set.
• Connect the audio cable to the audio output
of the external device and to audio inputs L
and R on the TV set.
• Select YPBPR in the SOURCE menu.
HDMI Connection
The HDMI connector transmits digital video
and audio signals of a connected device in very
good quality.
• Connect via HDMI cable (purchase
separately) to HDMI output of the external
device and to and HDMI input on the TV set.
• Select HDMI1 or 2 in the SOURCE menu.
Connect Headphones
CAUTION: High volume via earphones or
headphones may lead to hearing loss. Prevent
health problems and avoid listening to loud
volume via earphones or headphones for a long
period of time.
. Press VOL – to set a low volume level.
2. Connect headphones to earphones jack
EARPHONE on the TV set.
The speakers are muted and the sound is
only output via the headphones.
3. Set the desired volume level.

5. BASIC OPERATION

All settings can comfortably be changed on
screen with remote control and OSD menu.
27