Maintenance, Cleaning, Service And Disposal - Vasner StandLine 25R Bedienungsanleitung

VASNER
Note:
The point on the right of the screen flashes when the timer of the product is
ready.
1L, 2L, ... :
1H, 2H, 3H, ...9H:
Er:
OH:
Usage without function button:
Function button on the front housing:
• It controls the heat level adjustment and timer adjustment of the heater.
The heat level is increased one level with each pressing.
• This button is pressed for 6 seconds to perform timer adjustment. The desi-
red time zone is selected from the emerging screen menu.
1H, 2H, 3H, ...9H
• Standby-Mode:
--
" This symbol appears on the screen, when it is ready for operation.
„
Maintenance, Cleaning, Service, Disposal
Maintenance
It is very important to perform careful and regular maintenance of the device in
accordance with the recommendations made in this manual so that it can run
24
shows the power level of the heater.
heater timer indicator
(programming up to 9 hours is possible)
error indicator
(it indicates that the device is not balanced).
Overheating
(when the device detects heat from the environment
other than its heat program, it rings an alarm for
1 minute as a warning and stops the heating function.)
GB