Con Guring Source Settings; Con Guring Satellite Settings - Schaub Lorenz 26LT481CT Bedienungsanleitung

Con guring Source Settings
You can enables or disable selected source options.
The TV will not switch to the disabled source options
when "SOURCE" button is pressed.
• Select Sources in the Settings menu and press
OK button.
• Press" " or " " buttons to select a source.
• Use " " or " " button to enable or disable the
selected source. Changes are automatically
stored.
Con guring Satellite Settings
Select Satellite settings in the Settings menu to
con gure satellite settings. Press OK button.
Satellite List: To view available satellite list, please
select Satellite list option from satellite settings menu.
If you want to add new satellite information, please
press YELLOW button. If you want to change satellite
name, please use the navigation buttons. To delete
a satellite from list, press BLUE button or press OK
to edit.
Antenna Installation: In this section, you can
change antenna settings and scan satellite for new
channels.
SatcoDX (optional): You can perform SatcoDX
operations using the Satelite Settings. On SatcoDX
menu, there are two options regarding to satcodx
feature as in the following:
You can download or upload satcoDX data. In order
to perform these functions supported for satcodx
feature, a USB device must be connected to the TV
in the  rst place.
You will be able to upload current services and related
satellites & transponders in TV, to a USB device with
a  le named "mb70_sdx.sdx ".
In addition to the uploading feature you will be
able to download one of the satcodx  les stored in
USB device, to the TV. When download option is
selected, a list of satcodx  les stored in USB device
will displayed.
When you select one of these satcodx files, all
services and related satellites and transponders in
the selected  le will be stored in TV. If there are any
installed terrestrial, cable and/or analog services,
they will be kept and only satellite services will be
removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating "No
Signal" may be displayed if antenna settings are not
con gured properly.
English - 80 -