Troubleshooting - Atag MC3211C Bedienungsanleitung

IF YOU REALIZE THA T
The oven isn't heating
The light inside the oven isn't
working.
The cooling fan keeps working
after the oven is turned off.
The oven light stays on even
when the oven is switched off
The oven smokes during
cooking
The oven makes noises after
cooking is finished.
The oven gives off sparks.
The food does not get hot
when in microwave mode.
In all cases, if you are unable to solve the problem yourself, please contact the After-Sales Service
without delay.
POSSIBLE CAUSES
The temperature selected is too low.
The oven isn't connected to the power
supply.
The fuse has blown.
Other causes.
The lamp is unusable.
The oven isn't connected to the power
supply or the fuse has blown.
The fan stops three minutes at the
most after using the microwave, or
when the oven temperature has drop-
ped below about 120°C, if it has been
used for traditional or combined
cooking..
If it has not stopped
1. The oven door is not closed correctly.
2. There is a faulty component in the
microwave circuit.
Cooking temperature too high.
The fan in the top of the oven (invisible)
works even when the oven has stop-
ped.
There is a metallic element too near a
wall or the rack
Microwaves are not reaching the food
The door is not shut correctly.

troubleshooting

what if.....
WHA T SHOULD YOU DO?
- Raise the temperature setting.
- Connect to power supply
- Change the fuse, checking that it is
16A
- Contact the After-Sales Service.
- Change the bulb.
- Connect to power supply or change fuse.
- Nothing.
- Contact the After-Sales Service.
1. Check that the door is completely closed.
2. Call the After-Sales Service
Lower the cooking temperature (see
enclosed cooking guide)
- This is normal. Your oven is fitted with a
fan that continues to run until the oven
has cooled down.
- Remove all metal elements from close
to the walls.
- Never use a metal element with the
rack
- Check that your utensils are compati-
ble with microwave ovens.
- Check that door shuts correctly.
GB 21