Philips TT3003 Benutzerhandbuch Seite 42

English
42
Problem
The appliance does
not show light
intensity 1 when I
switch it on.
The appliance
produces a strange
smell.
Possible cause
The appliance
needs to be
reset.
The body
attachment is
dirty.
You have not
shaved the area
to be treated
properly.
You stored
the appliance
in a dusty
environment.
Solution
To reset the appliance,
switch it off and on again.
If the appliance still does
not show light intensity
1, contact your Customer
Care Centre, your Philips
dealer or a Philips Service
Centre.
Clean the body
attachment carefully. If you
are unable to clean the body
attachment properly, contact
the Consumer Care Centre
in your country, your Philips
dealer or a Philips service
centre to replace the body
attachment.
If there are hairs on the area
to be treated, these hairs
may get burnt when you use
the appliance. As a result,
you notice a strange smell.
Shave the area to be treated
properly before you use the
appliance. If shaving causes
skin irritation, trim hairs as
short as possible and use a
comfortable setting.
The strange smell disappears
after a few flashes.