Standby Mode; Initial Setup - Samsung PS51F5000 Bedienungsanleitung

The TV's Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.
✎
Some functions which require a PIN code may not be available.
✎
The product colour and shape may vary depending on the model.
✎
Exits the menu when pressing the controller more than 1 second.
✎
When using the controller in the up/down/left/right directions, make sure you do not push the controller in first. If you push the
controller in first it will not move in the up/down/left right directions.
The image is drawn by facing the front side of

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric
power is still consumed even when the power button is turned off. It is best to unplug the power cord.
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP
button. Setup is available only when the source is set to TV.
If You Want to Reset This Feature...
You should do Setup (MENU
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0" (except France). If you want
to change the PIN number, use the Change PIN function.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
"0-0-0-0" (France: "1-1-1-1"):
[PF45005000-XNZF]BN68-04819C.indb 6
Using the TV's Controller (Panel Key)
Selecting the Menu
TV Controller
the TV.

Initial Setup

→ System) again at home although you did in shop.
(off) → → 8 → 2 → 4 →
POWER MUTE
English - 6
Selecting the Media Play
Selecting a Source
Return
Power off
Function menu
Remote control sensor
POWER (on).
2013-01-23 11:00:51