Commissioning; Safety Information; Delivery Scope And Transport Inspection - Caso VarioPower 3400 Classic 2240 Originalbetriebsanleitung

Danger
► Do not operate this device if its power cable or plug is damaged, if it does not work
properly or if it is damaged or has been dropped. If the power cable is damaged, it will
need to be replaced by the manufacturer or his service agency or a similar qualified
person, to avoid any dangers.
► Do not open the housing on the device under any circumstances. There is a danger of
an electrical shock if live connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device can also occur.
► Do not touch the appliance or the mains plug with wet hands.
► Do not immerse the appliance in water or other liquids, and do not put it in the
dishwasher.
► Do not insert objects into the openings of the appliance. There is a risk of electrocution
if contact is made with voltage-carrying connections.
► Do not connect the device to the same outlet with other devices.

11 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

11.1 Safety information

Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of suffocation.

11.2 Delivery scope and transport inspection

As a rule, the Vario Power 3400 classic is delivered with the following components:
• Induction hot plate Vario Power 3400 classic
• Operating Instructions
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
caso Vario Power 3400 Classic
Please note
35