Quick-Freezing - Zanussi ZPL 9121 Bedienungsanleitung

Control Panel
A B C D
A. Normal/Super push button
B. Super control light
C. Warning light
D. Pilot light
E. Thermostat knob
Operation
Insert the plug into the wall socket. Turn the
O
thermostat knob (E), clockwise, beyond the Ç
(STOP) position.The pilot light (D) will light up,
indicating that the appliance is powered. The
warning light (C) will light up, indicating that the
temperature inside the appliance is to high.
To stop operation, simply turn the thermostat knob to
Ç O È
position .
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob towards
minimum or reduced (colder) by rotating the knob
towards maximum. However, the exact setting
should be chosen keeping in mina that the
temperature inside the refrigerator depends on:
¥ room temperature;
¥ how often the door is opened;
¥ the quantity of food stored;
¥ location of appliance.
A medium setting is generally the most suitable.

Quick-freezing

For quick-freezing, push the button (A). The super
control light (B) will then light up.
40
6
5
4
1
3
2
E
Warning light (C)
The temperature alarm light turns on automatically
È
whenever the temperature within the freezer rises
above a certain value which might endanger
satisfactory long-term conservation.
It is perfectly normal for the temperature alarm light
to remain lit up for a short time after the freezer is
initially turned on. It will remain lit up until the
optimum temperature for the conservation of frozen
food is attained.
Freezing fresh food
The 4-star compartment is suitable for long term
storage of commercially frozen food and for freezing
fresh food.
To freeze fresh foods allow it to run on the fast
freeze setting for at least 24 hours before loading
food.
Place the food to be frozen in the compartments as
shown in figure.
9 Kg
7 Kg
D670
Ma§en
Aus GrŸnden der Sicherheit mu§ eine
MindestbelŸftung gesichert sein, wie aus der
Abb.hervorgeht.
Achtung: Die Ventilations - ...ffnungen mŸssen
immer saubergehalten werden.
Montageanleitung fŸr den Einbau
Montageteile
Mšbelschrank ausrichten
9