Herunterladen Inhalt Inhalt Diese Seite drucken

Other Information; General Information - Siemens sf 25261 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für sf 25261:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

en

Other information

Notes on waste disposal
Old appliances still have some residual
value. An environment-friendly method of
disposal will ensure that valuable raw
materials can be recovered and used
again.
When an appliance has reached the end
of its working life, unplug it from the mains.
Cut through the mains cable and dispose
of it together with the plug.
Destroy the door locking mechanism. This
will ensure that children at play cannot
become locked inside and are not
exposed to the risk of suffocation.
Your new appliance was protected by
suitable packaging while it was on its way
to you. All materials used for this purpose
are environment-friendly and can be
recycled. Please make a contribution to
protecting the environment by disposing of
the packaging appropriately.
Do not allow children to play with any parts
of the packaging. There is a risk of
suffocation by the cardboard boxes and
the plastic wrapping.
Up-to-date information concerning options
for disposal can be obtained from your
retailer or local municipal administration.
Information about comparability
tests
The conditions for comparability tests can
be found on the supplementary sheet
"Information about comparability tests".
44

General information

Measures must be taken to ensure that
built-under and built-in units that are
subsequently re-sited as free-standing
appliances cannot topple over. This can
be achieved by bolting the dishwasher
to the wall or fitting it under a
continuous work surface which is
screwed to the adjacent cupboards.
For Switzerland only:
There are no restrictions on installing
the appliance between wooden or
plastic walls as part of a fitted kitchen. If
the appliance is not plugged into a wall
socket, it must be connected to the
mains via a separator for all poles
within the domestic wiring system. This
device must have a gap of at least
3 mm between open contacts, in order
to conform with relevant safety
regulations.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis