Filling The Rinse-Aid Container - Siemens se 70a590 Gebrauchsanweisung

Filling the rinse-aid
container
The purpose of a rinse-aid is to prevent
the formation of water marks on tableware
and utensils, and to ensure that glasses
are clean and sparkling. The rinse-aid is
consumed during the washing process.
Fold back the lid on the rinse-aid
container .
30
To open the lid, press the mark
the rinse-aid lid and simultaneously lift
the lid off the lug
Pour the rinse-aid into the filler hole
until the level indicator turns dark.
Close the lid, ensuring that you hear it
snap closed.
Important
Use only rinse-aids intended
for use in domestic
dishwashers.
on
.
Adjusting the amount of
rinse-aid
The amount of rinse-aid added to the
water can be varied by adjusting the
stepless control. The rinse-aid control has
been set to "4" in the factory.
Do not alter the setting of the rinse-aid
control unless streaks (turn knob towards
"–") or water marks (turn knob towards "+")
are left on the dishes.
rinse–aid control
Low rinse-aid indicator
As long as the rinse-aid refill indicator on
the panel or dispenser
illuminated, there is sufficient rinse-aid in
the dishwasher.
LOW RINSE-AID indicator
en
30
has not
30
35