4.
Clean the appliance and the interior accessories with a cloth and lukewarm
water. Commercially available dish washing detergents may also be used.
5.
After cleaning wipe with fresh water and rub dry.
Accumulation of dust at the conden-
ser increases energy consumption.
For this reason carefully clean the
condenser at the back of the
appliance once a year with a soft
brush or a vacuum cleaner.
6.
Check the water drain hole on the
rear wall of the fridge. Clear a
blocked drain hole with the aid of
the green peg in the pack of acces-
sories included with the appliance.
7.
After everything is dry place applian-
ce back into service.
Energy Saving Tips
• Do not install the appliance near cookers, radiators or other sources of
warmth. High ambient temperatures cause longer, more frequent opera-
tion of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base and at
the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to cool
first.
• Only leave door open as long as necessary.
• Do not set temperature any colder than necessary.
• Keep the heat emitting condenser, the metall grille on the rear wall of
your appliance, always clean.
What to do if ...
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can rectify
yourself using the following instructions. Do not perform any other work on
the appliance if the following information does not provide assistance in
your specific case.
42
D037