Sony CDX-GS500R Bedienungsanleitung Seite 27

ERROR
 The disc is dirty or inserted upside down.
– Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
– Insert another disc.
 USB device was not automatically recognized.
– Connect it again.
 Press  to remove the disc.
FAILURE
 The connection of speakers/amplifiers is
incorrect.
– See the installation/connections manual of
this model to check the connection.
HUB NO SUPRT (Hubs Not Supported)
 USB hub is not supported on this unit.
NO AF (No Alternative Frequencies)
 There is no alternative frequency for the
current station.
– Press  +/– while the program service
name is flashing. The unit starts searching
for another frequency with the same PI
(Program Identification) data ("PI SEEK"
appears).
NO DEV (No Device)
 "USB" is selected as source without a USB
device connected. A USB device or a USB cable
has been disconnected during playback.
– Be sure to connect a USB device and USB
cable.
NO DISC
 The disc is ejected, or "CD" is selected as the
source without inserting the disc.
NO MUSIC
 The disc or USB device does not contain a
music file.
– Insert a music CD in this unit.
– Connect a USB device with a music file in it.
NO NAME
 A disc/album/artist/track name is not written
in the track.
NO TP (No Traffic Programs)
 The unit will continue searching for available
TP stations.
NOT FOUND
 There is no item beginning with the selected
letter in Alphabet search.
OFFSET
 There may be an internal malfunction.
– Check the connection. If the error indication
remains on in the display, consult your
nearest Sony dealer.
OVERLOAD
 USB device is overloaded.
– Disconnect the USB device, then change the
source by pressing .
– Indicates that the USB device is out of order,
or an unsupported device is connected.
PUSH EJT (Push Eject)
 The disc cannot be ejected.
– Press  (eject) (page 5).
READ
 The unit is reading all track and album
information on the disc.
– Wait until reading is complete and playback
starts automatically. Depending on the disc
structure, it may take more than a minute.
USB NO SUPRT (USB Not Supported)
 The connected USB device is not supported.
– For details on the compatibility of your USB
device, visit the support site.
" " or "
 During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
" "
 The character cannot be displayed with the
unit.
For App Remote:
APP -------- (Application)
 Connection with the application is not made.
– Establish iPhone connection again.
APP MENU (Application Menu)
 Button operation cannot be performed while a
menu on iPhone is open.
– Exit the menu on iPhone.
"
27