Other Functions
Sleep Timer Function
The Sleep Timer function allows you to set the TV to switch itself automatically to the standby mode after a specified time
period. You can select the time period from among 30 minutes, 60 minutes, 90 minutes, and 120 minutes.
To set the Sleep Timer function
Press
on the remote control repeatedly until the desired time period ("30 min," "60 min," "90 min," or "120 min") appears on
the screen.
When the Sleep Timer function is on, the
To cancel the Sleep Timer function
Press
repeatedly until "Off" appears on the screen.
• If you switch off the TV and switch it on again, the Sleep Timer function is reset to "Off."
• The message "Sleep timer will end soon. Power will be turned off." appears on the screen one minute before the TV
switches to the standby mode.
• If you press
/
is displayed on the screen.
Screen Memo Function
The Screen Memo function allows you to temporarily freeze and review the picture on the screen. This is useful to check and
make a note of information displayed on the screen, such as a mail address or a recipe.
To use the Screen Memo function
When the picture you want to freeze appears on the screen, press
Memo function and return to the normal TV picture.
• If you change the input source or the channel with the remote control, the Screen Memo function is cancelled.
• When the Screen Memo function is on, the picture remains still on the screen but the sound continues to play.
• When the Screen Memo function is on, the MENU,
(NexTView) buttons do not work.
32
Other Functions
(Sleep) indicator on the TV lights up in red.
on the remote control, the remaining time in minutes before the TV switches to the standby mode
on the remote control. Press
(Screen format),
(Picture mode),
again to cancel the Screen
(Teletext), and