Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Setting up the Travelling Cot
•
Remove the travelling cot from the bag. Open the Velcro fasteners and remove the mattress
(Fig.1).
•
Set up the travelling cot upright. Do not yet press the floor of the travelling cot down (Fig.2).
•
Pull the short sides apart until they engage audibly (Fig. 3a). Then pull the longer sides apart
until they also engage audibly (Fig. 3b).
Check all sides to ensure that each one has engaged safely. Now press the floor down until it
also engages audibly (Fig. 4).
•
Place the mattress in the travelling cot (Fig. 5).
•
Fix the mattress by guiding the Velcro fasteners through the 2 holes on either side of the
travelling cot floor and close them.
Folding the Travelling Cot together
2
•
Remove the mattress from the cot (Fig. 6)
•
Pull the strap on the floor of the travelling cot until the floor is halfway up (fig. 7).
•
In order to unlock the lateral sides, look for the press buttons underneath the upper frame surface.
Press the button upwards and push the relevant lateral side down. Repeat this process with the
other three sides (Fig. 8a and 8b).
•
In order to fold the travelling cot together, pull the strap in the centre of the floor up towards the top
and fold all four parts together (Fig. 9).
•
Wrap the mattress around the folded up travelling cot and hold it in place with Velcro fasteners (Fig.
10).
•
Place the travelling cot in the carrying bag for transportation.
3
Assembling the New-born-Insert
•
The supporting angles must be fixed to the circumference of the bed frame. Make sure that they
are fixed properly (see also Fig. 12).
•
Now place the mattress in the fixed New-born-Insert (see Fig. 13).
•
Before you can remove the New-born-Insert, remove the mattress; by gently pulling the supporting
angles you can remove these from the cot frame.
GB
9
Werbung
Inhaltsverzeichnis
