Abus TVIP20001 Bedienungsanleitung Seite 99

Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
MPEG-4
Viewer authentication:
On:
Off:
Multicast streaming:
Multicast address:
Video port:
Audio port:
Time-To-Live:
Image Size:
Frame rate:
Quality:
Auto:
Fixed quality:
Fixed bitrate:
IP interval:
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
Settings for the user name and password entry when requesting video files
(e.g. using VLC Media Player or Quicktime Player).
The user name and password are requested after video data is entered and
called up.
The security query is not made. The video stream can be received directly (e.g.
by entering rtsp://IP:RTSP-Port/video.mp4 as a URL).
(See above under "H.264").
Entry of the Multicast server address.
Automatic or manual assignment of the Multicast video port.
Automatic or manual assignment of the Multicast audio port.
Length of time the packet is kept before being discarded.
Select from the following image resolutions (pixels): 1280x1024, 1280x720,
640x480, 320x240.
Specifies the frame rate in frames per second (fps).
Settings for the quality of the video stream.
The video quality is adjusted automatically according to the available network
bandwidth.
The video quality is set to a fixed level. The network bandwidth requirements
can rise or fall according to demand.
The bit rate of the video stream is set to a fixed level. The video quality can
vary according to the level of activity.
This parameter specifies the full-screen interval. The full-screen interval (IP
interval) specifies how often a full-screen image is contained in the video
stream (differential image procedure, MPEG-4). A lower value requires more
network bandwidth, but leads to an improvement in image quality.
99
English