Meister BPS 600 Betriebsanleitung Seite 36

5403150-Pendelhubs-man 17.01.14 11:23 Seite 36
possible that the tools will come
across hidden power cables or its
own cable. Contact with a power-
carrying cable can also put metal
parts of the unit under power and
cause an electric shock.
• Only use sharp saw blades that are in
perfect condition. Cracked, bent or
dull saw blades should be replaced
immediately.
• Adapt the insert tools, stroke rate and
pendulum motion to the materials.
Pay attention to even feed.
• Only operate the device with a
mounted saw shoe (10). When
working, always ensure that the
footplate is resting on the workpiece.
• Always switch on the device before
inserting into to the workpiece.
• Materials containing asbestos may
not be processed. When working with
any other materials containing fibres,
use dust protection masks and
extraction systems.
• If you wish to use the device
outdoors, ensure it is connected via a
residual current circuit breaker. The
extension cable and plug must be
designated for use outdoors.
• Do not break the saw blade by
pressing on the sides.
• Secure the workpiece using clamping
mechanisms to prevent it from slipping.
• Make sure that cables always lead
away from the rear of the workplace.
• When operating the device, always
guide it with both hands and ensure
36
that you are standing sturdily.
• The device may not be damp and
may not be used in a damp
environment.
• Prior to each use, check the device,
cable and plug. Have any damages
eliminated by a specialist. Only plug
the plug into the socket when the tool
is switched off.
• When carrying out work that
generates dust, wear a breathing
mask and goggles – do not smoke,
avoid naked flames.
• When using saw blades and handling
rough materials, wear gloves.
• Wear protective gloves to prevent
injuring yourself on sharp cutting
edges when changing the saw blade.
• Wear ear defenders.
• Before carrying out any work on the
machine, always pull the plug out of
the socket.
• Do not leave tool keys inserted.
• Observe the general safety
instructions with regard to operating
power tools.
• If connection cables are damaged,
they must – in order to reduce the