Sharp PG-C45X Anleitung Seite 22

PG-C45X
No. Adjustment Items
10 Adjustment of
video tint
11 Adjustment of
NTSC color
saturation
12 Adjustment of PAL
color saturation
13 Adjustment of
SECAM color
saturation
14 Adjustment of
video white bal-
ance
15 Adjustment of
COMPO bright-
ness
Adjustment Conditions
1. Feed the split color bar signal.
2. Select the following group and sub-
ject.
Group: VIDEO1
Subject: TINT
1. Feed the split color bar signal.
2. Select the following group and sub-
ject.
Group: VIDEO
Subject: N-COLOR
~ Connect the oscilloscope to pin (1)
of P1301.
1. Feed the PAL color bar signal.
2. Select the following group and sub-
ject.
Group: VIDEO
Subject: P-COLOR
~ Connect the oscilloscope to pin (1)
of P1301.
1. Feed the SECAM color bar signal.
2. Select the following group and sub-
ject.
Group: VIDEO
Subject: S-COLOR
~ Connect the oscilloscope to pin (1)
of P1301.
1. Feed the NTSC monoscope pattern
signal.
2. Select the following group and sub-
jects.
Group: VIDEO
Subjects: V-R1-BLK, V-B1-BLK
1. Feed the 0% gray pattern signal
(480I).
2. Select the following group and sub-
ject.
Group: COMPO
Subject: G-BRIGHT
Adjustment Procedures
1. Confirm the fixed value.
Fixed value: 128
1. Confirm the fixed value.
Fixed value: 54
(Reference: 0.4 Vp-p)
100% White Red
1. Confirm the fixed value.
Fixed value: 51
(Reference: 0.4 Vp-p)
100% White Red
1. Confirm the fixed value.
Fixed value: 48
(Reference: 0.5 Vp-p)
100% White Red
1. Using the set's control switch or the
remote controller button, adjust the
settings to have the same white bal-
ance as on the standard monitor.
1. Feed the signal to INPUT 1.
Adjust the setting so that some bits
should be missing onscreen.
22