F Iris Level Settings (Iris Level); G Day/Night Settings (Day/Night); (Vcc-9100P Series Only) - Sanyo VCC-9000EBCP Bedienungsanleitung

LENS SETTINGS

F Iris level settings (IRIS LEVEL)

1 Select "IRIS LEVEL", and then tilt the
joystick lever to c.
The "IRIS LEVEL" setting will flash.
ZOOM SPEED
EL ZOOM
JOYSTICK AUTO
AUTO FOCUS
AUTO IRIS
·IRIS LEVEL
BACK
Tilt the joystick lever to j or l to select
2
the iris level, and then tilt it to d.
Available settings: 000–100 (bright)
(Default setting: 040)
Select "BACK", and then tilt the joystick
3
lever to c to complete the setting.
:HIGH
:OFF
:BOTH
:005
:005
:040
- 24 -

G Day/Night settings (DAY/NIGHT)

(VCC-9100P series only)

Select "DAY/NIGHT", and then tilt the
1
joystick lever to c.
The "DAY/NIGHT" setting will flash.
ZOOM SPEED
EL ZOOM
JOYSTICK AUTO
AUTO FOCUS
AUTO IRIS
IRIS LEVEL
·DAY/NIGHT
BACK
Tilt the joystick lever to j or l to select
2
the day/night operation, and then tilt it to
d.
Available settings: AUTO, COLOR, B/W
(Default setting: AUTO)
Select "BACK", and then tilt the joystick
3
lever to c to complete the setting.
NOTE:
• When the images are switched, a switching sound may be
heard from inside the main unit and the images may
become distorted for a brief moment, but this is normal.
• If using infrared illumination, monitoring may switch
automatically from black-and-white to color if a lot of light is
reflected from the object being illuminated. Set up the
infrared illumination in a place where it will not interfere with
monitoring.
• If "DAY/NIGHT" is set to "AUTO", the sensitivity up
(SENSE UP) function will only operate during
black-and-white monitoring.
:HIGH
:OFF
:BOTH
:005
:005
:040
:AUTO
English