Klarstein 10029706 Montageanleitung Seite 35

Step 4: outlet pipe
1. The pipe can be led out in the
direction of right, rear right, left or
rear left.
right
Step 5: connect the pipe of indoor unit
1. Aim the pipe joint at the corresponding
bellmouth..
2. Pretightening the union nut with hand.
3. Adjust the torque force by referring to the following
sheet. Place the opened wrench on the pipe joint
and place the torque wrench on the union nut.
Tighten the union nut with torque wrench.
4. Wrap the indoor pipe and joint of connection
pipe with insulating pipe, and then wrap it with
tape.
Ø Wrench (mm)
9.52
35
rear left
Torque (Nm)
6 15-20
30-40
12 45-55
16 60-65
19 70-75
2. When select leading out the pipe
from left or right, please cut off the
corresponding hole on the bottom case.
left
cut off
the hole
pipe joint
open-end wrench
right
union nut pipe
union nut
pipe