Gemü 1235 Montageanleitung Seite 23

Contents
1 Notes for your safety
1.1 General information
1.2 Explanation of symbols and signs 24
1.3 Safety notes
1.4 Correct use
1.5 Information on use
in damp conditions
2 Manufacturer's information
2.1 Delivery and performance
2.2 Storage
2.3 Tools required for
installation and assembly
3 Assembly / Disassembly
3.1 Mounting kit assembly
3.2 Electrical position
indicator mounting
3.3 Disassembly
4 Functional description
4.1 Device version 3E / 4E
5 Electrical connection
5.1 Device version 3S / 4S
5.2 Device version 3E / 4E
6 Optical indication
6.1 Optical indication
6.2 High visibility position indicator
7 End position programming
7.1 General information
7.2 Device version 3E / 4E
7.2.1 Setting the switch points
7.3 IO-Link functions
7.3.1 IO-Link process data
7.3.2 IO-Link parameter data
7.3.3 IO-Link diagnostic messages
7.4 Troubleshooting / Fault clearance 37
7.4.1 Device version 3S / 4S
7.4.2 Device version 3E / 4E
8 Dimensions
9 Technical data
10 Order data
11 Accessories
12 Disposal
13 Returns
14 Information
15 EU declaration of conformity
1 Notes for your safety
23 Please read the following notes carefully and
23 observe them!
The manufacturer shall undertake no
24 responsibility for the GEMÜ electrical
24 position indicator if these safety notes are
not observed.
25
25
1.1 General information
25
25
Prerequisites to ensure that the GEMÜ
electrical position indicator functions
25
correctly:
25
Correct transport and storage
G
25
Installation and commissioning by trained
G
personnel
26
Operation according to these installation,
G
26
operating and maintenance instructions
26
Recommended maintenance
G
26
27
All rights including copyright
27
and industrial property rights are
27
expressly reserved.
27
27
The electrical position indicator must
29
be used in accordance with these
29
directions. All information in these
29
installation, operating and maintenance
30
instructions regarding operation,
32
servicing and maintenance must be
33
observed and applied. If the information
34
is not observed, the operator's
35
guarantee rights and the manufacturer's
37
legal liability cease.
Therefore, you must observe:
37
the contents of these installation,
G
38
operating and maintenance instructions.
39
the relevant safety regulations for the
G
39
installation and operation of electrical
40
systems.
41
that this device must not be used in
G
42
potentially explosive areas.
42
42 The regulations, standards and guidelines
43 named in these installation, operating and
maintenance instructions are only applicable
in Germany. If the GEMÜ electrical position
indicator is used in other countries, the local
applicable regulations must be observed.
23 / 44
1235, 1236