Defrost function
GB
IE
Warming up crusty bread rolls
Crumb tray
8
By pressing the button "Defrosting"
and toasted. With this, the toaster slowly warms the bread.
1) After setting the desired browning level, insert the bread into the toaster
slots 1.
2) Press the operating slide 3 downwards.
3) Press the button "Defrosting"
4) When the defrosting and toasting process is fi nished, the toaster switches itself
off automatically, the control lamp integrated in the button "Defrosting"
goes out and the bread slices are ejected to the top.
NEVER lay bread rolls directly onto the toaster, ALWAYS use the bread roll
holder 2.
1) Place the bread roll holder 2 on the toaster so that it is fi rmly seated in the
designated hollows.
2) Place the bread-rolls onto the holder and start the toasting procedure. For
a medium browning, set the toasting dial 5 to level II. The browning can
however vary, depending on the composition and type of bread roll.
NOTICE
Place the rolls onto the bread-roll holder 2 in such a manner that they
►
cannot fall through the holder 2.
►
After toasting, the rolls will be very hot.
3) As soon as the toaster switches itself off , turn the rolls over to toast the other
side of them and then switch the toaster back on.
4) When you no longer need the bread roll holder 2, wait until it has cooled
down and then remove the bread roll holder 2 from the toaster.
When toasting, crumbs that fall from the bread are collected in the crumb tray 9.
1) To empty crumbs from the crumb tray 9, simply pull it out to the side.
2) Tip out the crumbs.
3) Slide the crumb tray 9 back into the toaster so that it palpably engages.
8, also frozen bread can be thawed
8. The integrated control lamp glows.
8
SDLTD 1400 A1