Technical Data; Safety Information; Symbols - Parkside PSSA 3.6 C3 Originalbetriebsanleitung

GB IE

Technical data

Unit
Motor voltage ................. 3.6 V
Rated speed (n ) .......................200 min
0
Torque .................................. max. 4 Nm
Protection class ..............................
Weight (without charger) .............0.43 kg
Sound pressure level (L
................................................ K= 3 dB
Sound power level (L
................................................ K= 3 dB
Vibration (a ) ..........0.37 m/s
h
Battery (Li-Ion)
Battery cells ...................................... 1
Nominal voltage ......................3.6 V
Capacity .................................. 1.5 Ah
Loading time ............................ ca. 3 h
Charger ............... IVP0550-0550W
Nominal consumption ..................48 W
Voltage input ....................100-240 V~,
.................................. 50/60 Hz, 0.2 A
Voltage Output ..........5.5 V
Output rating ........................max. 6 W
Protection class .............................
Protection category ...................... IPX0
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical and
optical alterations to serve progress may
be made without notice. All measurements,
instructions and other data given in this
manual are therefore given without guar-
antee of correctness. Legal claims made
on the basis of this manual are therefore
excluded.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
6
1.5 Ah
III
) ........ 55.4 dB(A)
pA
) .......... 66.4 dB(A)
wA
, K= 1.5 m/s
2
550 mA
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
-1
of the power tool from the stated
III value depending on the manner in
which the power tool is used.Safety
precautions aimed at protecting the
user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for
2
example, times during which the
power tool is turned off and times
when the tool is turned on but is run-
ning idle).

Safety information

When using the device, please observe the
safety instructions.

Symbols

Symbols in the manual
II
Warning symbols (instead of
the exclamation mark, the
danger may be explained)
with information on damage
and injury prevention.
Instruction symbols (the instruction
may be explained at the place of
the exclamation mark) with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.