What To Do If - Electrolux EON3000 Benutzerhandbuch

20 www.electrolux.com
Installing the door and the glass panel

9. WHAT TO DO IF...

WARNING!
Refer to "Safety information"
chapter.
The cooking zones do
not operate.
The appliance does not
operate.
The appliance does not
operate.
The oven lamp does not
operate.
Steam and condensation
collect on the food and in
the oven.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Problem
When the cleaning is completed, install
the glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that af-
ter the installation the surface of the glass
panel frame on the screen-printing zones
is not rough when you touch it.
Make sure that you install the internal
glass panel in the seats correctly. Refer to
the illustration.
Possible cause
Refer to the user manual for the hob.
The appliance is not acti-
vated.
The fuse in the fuse box
is released.
The oven lamp is defec-
tive.
You left the dish in the
oven for too long.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
Remedy
Activate the appliance.
Refer to the chapter "Dai-
ly use".
Do a check of the fuse. If
the fuse is released more
than one time, contact a
qualified electrician.
Replace the oven lamp.
Do not keep the dishes in
the oven for more than 15
- 20 minutes after the
cooking ends.
.........................................
.........................................
.........................................