Cover Detection; Video Loss Detection; Alarm Input; Alarm Output - Abus IPCS82520 Bedienungsanleitung

7.5.8.2 Cover Detection

Enable Cover Detection:
Preview Area:
Draw Area:
Delete:
Sensitivity:

7.5.8.3 Video Loss detection

Enable video loss monitoring:

7.5.8.4 Alarm input

Alarm Input No.:
Alarm Name:
Alarm Type:

7.5.8.4 Alarm output

Alarm Output:
Alarm Name:
Delay:
This function detects if an area within the live image is covered.
Preview and configuration area.
Draw here an area which shall be monitored by tamper detection.
Procedure: Press to start -> draw area with left mouse button ->
press again to stop drawing.
Delete the area.
Change the sensitivity of the detection (3 levels).
To enable the feature, enable this check-box. This function
can e.g. be used in the Alarm Manager to trigger an event.
Select the alarm input you want to configure (Amount depends
on camera model).
Enter a name as description.
Defines the non-operating and trigger state.
NO: Normally Open (Normal state open)
NC: Normally Closed (Normal state closed)
Select the alarm output you want to configure (Amount depends
on camera model).
Enter a name as description.
Select the duration of switching the alarm output in case of an
event.
Manual: the output is only switched for the time of the event.
105