Technical Data; Environment Concerns; Installation - AEG FAVORIT 55020 Benutzerinformation

– The display shows the setting of the rinse aid dispenser.
7. Press button Delay to change the setting.
8. Deactivate the appliance to confirm.

TECHNICAL DATA

Dimensions
Water supply pressure
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance door shows the electrical connection
data.
If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic
panels and aeolian), use a hot water supply to decrease energy consumption.

ENVIRONMENT CONCERNS

The symbol
be treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the
shop where you purchased the product.
Recycle the materials with the symbol
recycle it.

INSTALLATION

Installation under a counter
Put the appliance adjacent to a water tap and a water drain.
Remove the appliance worktop to install it under a sink unit or a kitchen worktop.
Width
Height
Depth
Minimum
Maximum
1) Cold water or hot water
Place settings
on the product or on its packaging indicates that this product may not
The rinse aid dispenser is off.
The rinse aid dispenser is on.
. Put the packaging in applicable containers to
21
Technical data
596 mm
850 mm
625 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
12