Getting Started; Switching The Speaker On; Establishing The Wi-Fi Connection; Establishing The Wi-Fi Connection Via Wps - Silvercrest SMRS 35 A1 Bedienungsanleitung

blue LED flashes 3 times fast, followed
by a short pause
blue LED on
green LED on
green and blue LEDs flashing fast
green and blue LEDs flashing slowly two
times

Getting started

Switching the speaker on

Connect the speaker to the supplied power adapter (B) and then connect the power adapter (B) to
an easily accessible power socket. Toggle the power switch (8) located on the back panel of the
unit to "ON". The speaker is now in standby mode. The LEDs are off. There is no Wi-Fi connection.

Establishing the Wi-Fi connection

There are 2 ways to connect the speaker (A) to the existing network of your router via Wi-Fi: either
by pressing the WPS / RESET button (3) or by downloading the "UNDOK" control app for free
®
from the Apple App Store or from the Google
connection for the first time, make sure to place the speaker (A) as close as possible to the router to
achieve an optimum Wi-Fi signal transmission. Then install the speaker (A) within the Wi-Fi signal
range.
Please note that a maximum of 16 devices can be connected to a network.

Establishing the Wi-Fi connection via WPS

If your router features a WPS button, the easiest way to connect the speaker (A) to the network is
using this button.

Place the power switch (8) in "ON" position and briefly press the On/Standby button (1) to
go to connection mode. After a brief initialisation period (yellow and blue LEDs on
simultaneously, then one LED lights green) the blue LED flashes slowly.

Next press the WPS button on your router and confirm the connection by pressing the WPS /
RESET button (3) on the speaker (A) top.
See the operating instructions for your router.
The speaker (A) establishes a network connection. The blue LED flashes 3 times fast, followed by a
short pause.

After the connection has been established, the blue LED goes on.

Now the speaker (A) can play audio signals from the network.
WPS mode, waiting for WPS signal from router
Connected to the network
AUX mode
Wi-Fi connection fault
Maximum volume has been reached
®
Play Store. In both cases, when establishing the
SilverCrest SMRS 35 A1
English - 11