WolfVision VZ-9 Bedienungsanleitung Seite 15

Antitheft Device - T-bar lock
The Visualizer can be fixed with a
stolen. Follow the instructions from the cable lock manual.
Table Lock Bolt
160mm (6.3")
turntable
Fixing for table
lock bolt
2
The turntable can be locked. Remove the screw
from the hole position 2 and insert it into the
specific hole position 1 (maybe the turntable has
to be turned until the thread is visible).
Use supplied tool:
1x socket head cap wrench 2,5mm
(E 27410)
Dimensions
395mm (15.6")
security cable T-bar lock (Kensington Lock)
The VZ-9 can also be fixed onto a table with the supplied Table
Lock Bolt, so that it can not be stolen. The thread to fix the bolt
is in the middle of the turntable.
Supplied accessories for anti-theft device (part number):
Socket head cap wrench 5mm
Socket head cap wrench 2,5mm
Screw DIN 7984, M8x35 Zn
Screw DIN 7984, M8x50 Zn
Washer DIN 125A 8.4/16x1.6
Assembly instructions VZ 9
1
table
(sectional view)
14
®
, so that it can not be
slot for lock
(E 27400)
(E 27410)
(D 25120)
(D 25130)
(D 13030)
(E 27300)
washer 8.4/16x1.6
screw M8x35 oder
screw M8x50
395mm (15.6")
closed
320mm (12.6")