WolfVision VZ-C3D Bedienungsanleitung Seite 7

Output formats
To ensure compatibility with almost every available 3D capable display device, the VZ-C3D can output
different 1080p formats. Please consult user manual of the used display device to find out the best fitting
mode.
2D:
- Left or Right / Overlay 50/50
3D:
- Side-by-Side / Line Alternate / Page Flip / Top-Bottom / Left&Right / Frame Packing
Frame Packing
L
L
R
R
Page Flip (also called Frame Sequential)
R
L
Left & Right
L
L
Side-By-Side
L R
L
R
Line Alternate (also called Line-By-Line)
R
L
R
R
L
L
R
R
L
L
R
R
L
L
R
L
Top-Bottom (also called Above-Below)
L
L
R
R
R
R
Upper and lower pictures (left/right) are added together
and will output as 2x 1080p.
The display device will receive full resolution (1080p) of
left and right pictures at full frame rate.
Left and right pictures will be output alternating.
The display device will receive full resolution (1080p)
of left and right pictures at half frame rate.
Left and right pictures will be output separately by
using both HDMI lines with full resolution (1080p) at full
frame rate.
Left and right pictures are compressed horizontally to
the half horizontal resolution and will output side-by-
side as 1080p.
The horizontal pixel lines will be output alternating left
and right picture information. Every second line will be
used to get 1080p as resulting resolution.
Upper and lower pictures (left/right) are compressed
vertically to the half vertical resolution and will output
above-below as 1080p.
6