Description - EuroLite DMX SUPERSTROBE 2700 Bedienungsanleitung

Always fix the fixture with an appropriate safety-rope.
The maximum ambient temperature T
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.

DESCRIPTION

Features
DMX-Strobe
• DMX-512 standard control (2 channels: brightness and flash-rate)
• Brightness steplessly adjustable (0-100%)
• Flash-rate steplessly adjustable (1-13 flashes/sec.)
• Elaborate reflector system
• Electronic power management
• Including colorfilter-frame
• Synchronizeable
• With 3-pin XLR-connection
• Flash-tube already installed
Overview
Safety bond
Power supply: 15 A
230 V AC, 50 Hz ~ Circuit Breaker
1 2 3
1. Safety-eyelet
2. Power supply
3. Circuit Breaker
4. Flash-control: To adjust the flash frequency (1-13 flashes per second).
5. Intensity-control: To adjust the dimming level (0-100%).
6. DIP switches
7. DMX-input-socket
8. DMX-output-socket
= 45° C must never be exceeded.
a
Flash rate Intensity
4 5
17/43
LIGHTING CONTROL
PROTOCOL DMX-512
XLR occupation:
1 2
1: Ground
1 2 3 4 5 6 7 8 9 10
3
2: Signal (–)
ON
3: Signal (+)
DMX In
6 7
00025936.DOC, Version 3.5
2 1
3
DMX Out
8