Temperature Control; Switching Off The Appliance; Storage; Repacking For Private Transport Purposes - Rowi HKH 1500/2/1 Retro Bedienungsanleitung

OFF position
Fan position
Heating level 1
Heating level 2
Tab. 2: Switch levels
When first put into operation or after a longer period without heating
a short-term odour can arise.
3.3

Temperature control

1. Start the appliance by setting the desired heating power using the heating level switch
(see Fig. 1, No. 1).
2. Turn the temperature control (see Fig. 1, No. 3) clockwise as far as it will go.
3. Once the desired temperature has been reached, turn the temperature control anticlock-
wise until you hear a distinct click. An integrated thermostat control now automatically
switches the appliance on and off, thereby ensuring a more or less constant temperature.
3.4

Switching off the appliance

1. The ventilator must continue running for about 1 minute before switching the fan heater
off.
2. Move the heating level switch (see Fig. 1, No. 1) to position "0".
3. Pull the power plug out of the socket.
Wait until the appliance has cooled down before covering it or putting it away.
3.5

Storage

Protect the appliance against dust, dirt and insects. Cover the appliance with the sheet
provided so that it is protected from impurities and damage or malfunctions caused by this.
3.6

Repacking for private transport purposes

Always pack the appliance in its original packaging for transportation to prevent transport
If the heating level switch is in this position, the appliance is
switched off.
If the heating level switch is in this position, only the fan is ope-
rated. Move the switch to this position if you wish to use the
appliance as a ventilator.
If the heating level switch is in this position,
the fan heater will provide a heat output of approx. 750 W.
If the heating level switch is in this position,
the fan heater will provide a heat output of approx. 1500 W.
30/36